
The Vishay Techno CDMA series devices are designed to lower component counts and placement costs for automotive and industrial applications, while reducing PCB sizes and
Featuring high off-state voltage of 800 V and dV/dt of 1000 V/μs, the Vishay Semiconductors VOT8024AM and VOT8121AM deliver high robustness and noise isolation for home
Designed to save space in computer and telecom applications, the Vishay Dale IHLP-1212AZ-01, IHLP-1212AB-01, and IHLP‑1212BZ-01 offer extremely low profiles down to 1.0 m
Featuring ferrite core technology and a low 15.4 mm maximum profile, the Vishay Dale IHDF-1300AE-10 operates over a demanding temperature range from -55 °C to +125 °C w
The VCNL3030X01 features an on-board infrared emitter (IRED) while the VCNL3036X01 is designed to be used with up to three external IREDs, for which an onboard driver wit
Combining high photo sensitivity with low 0.1 % crosstalk and virtually no tolerance between its segments, the Vishay Semiconductors K857PE enables a variety of sensor an
Offering twice the power of standard thick film chip resistors in this size, the RCC1206 e3 can be used in place of two parallel 1206 devices or a single device in the la
The Automotive Grade capacitor released today is available in four building heights — 12 mm, 15 mm, 18 mm, and 24 mm — and 12 standard dimension options.
Vishay BCcomponents NTCC201E4 devices with silver metallization support aluminum wire bonding and are compatible with reflow soldering
The emitter diodes offer a wavelength range of 265 nm to 280 nm, with a typical wavelength of 274 nm.
The device released today is the first transformer of its kind to utilize a second middle transformer leg to complete the resonant inductor portion of the circuit.
Compared to previous-generation solutions, the Vishay Semiconductors devices released today reduce reverse recovery charge (Qrr) by 60 %, resulting in 90 % lower recovery
This results in the industry’s lowest on-resistance times gate charge for devices in the same class, a key figure of merit (FOM) for 600 V MOSFETs used in power conversio
The DC Blocking Capacitors cover the HF, VHF, UHF, L, S, C, X, and Ku frequency bands, and offer resonance-free performance across the bands’ range.
The Vishay Semiconductors devices released today offer all the circuit configurations required for AC/DC, DC/DC, and DC/AC conversion in on-board charging applications
- MOSFET 2 N-CH 25V 8-POWERPAIR
- DIODE GEN PURP 50V 300MA DO35
- TVS DIODE 26.8VWM 47.7VC TO277A
- DIODE ARRAY SCHOTTKY 35V D2PAK
- TVS DIODE 90VWM 146VC DO215AB
- BRIDGE RECT 1PHASE 800V 2.8A GBU
- DIODE ZENER 25V 500MW DO35
- DIODE GEN PURP 1KV 20A TO263AB
- LED RED MINILED SMD
- DIODE GEN PURP 1.2KV 1A SOD57
- TVS DIODE 12VWM 19.9VC DO215AA
- TVS DIODE 36VWM 58.1VC P600
- DIODE ZENER 3.6V 500MW SOD80
- OPTOISO 5.3KV 2CH PHVOLT 8-SMD
- BRIDGE RECT 1PHASE 50V 2A KBPM
- TVS DIODE 24VWM 40VC P600
- THERM NTC 2.2KOHM 3181K 0603
- BRIDGE RECT 1P 200V 15A GSIB-5S
- DIODE ARRAY GP 200V 10A D2PAK
- TVS DIODE 64VWM 103VC DO214AC
- DIODE ZENER 13V 800MW DO219AB
- TVS DIODE 22VWM 35.5VC DO214AA
- DIODE GP 1.25KV 1.75A DO204
- DIODE SCHOTTKY 10A 80V TO-263AB
- TVS DIODE 5VWM 10VC DO204AC
- MOSFET N-CH 100V 31A TO247-3
- LED AMBER SMD MINILED SMD
- DIODE ZENER 13V 225MW SOT23-3
- LED GREEN CLEAR 2PLCC SMD



















































